Pentair LA01N Pool Pump with Energy Efficient Single Speed Excellent Pump and Easy to Replace
This energy efficient single speed universal booster pump has 3/4-Horsepower, 115/230-Volt. Full Load 13.0/6.5-Amps, 1.50- SF and 1.13-SFHP. Ideal replacement for pressure-side booster pumps. Use with legend platinum, legend platinum truck series, and legend automatic pool cleaners. Hose and adapters included. Made from durable, corrosion-proof materials, and provides 50-PSI at 12-GPM.
This is the exact same make or model that was hard connected to my system, a Century Centurion B668 motor. The hoses and quick disconnects we easy to hook up after a quick trip to Home Depot for glue, primer and a couple connectors. There are two things to be aware of: 1) The quick disconnects are easy to cross thread, so be sure to line up the compression nut. 2) Don't tighten the compression nut too tight or you will pinch through the hose. That's not a big deal, just shorten the flex line a little and reconnect.
After 2 weeks so far so good, motor runs well and is quiet, instructions do not explain how to connect the hoses to your Pentair pool pump system, only to the motor, but if you maintain your own equipment it's not hard to figure it out. The packaging could be improved as the capacitor cover on the top was knocked off in transport but it could be screwed back on without any apparent damage. It does not come with the electrical elbow connector so you may need to buy a new one if like mine was over 15 years old and damaged (only cost about $3 from Home Depot).
Original Pentair pool pump went out and the unit quickly arrived in less than 3 days. It was very easy to install and works great. I would recommend this product and will use this channel to replace my other pool components when needed.
This is the exact same make or model that was hard connected to my system, a Century Centurion B668 motor. The hoses and quick disconnects we easy to hook up after a quick trip to Home Depot for glue, primer and a couple connectors. There are two things to be aware of: 1) The quick disconnects are easy to cross thread, so be sure to line up the compression nut. 2) Don't tighten the compression nut too tight or you will pinch through the hose. That's not a big deal, just shorten the flex line a little and reconnect.
After 2 weeks so far so good, motor runs well and is quiet, instructions do not explain how to connect the hoses to your Pentair pool pump system, only to the motor, but if you maintain your own equipment it's not hard to figure it out. The packaging could be improved as the capacitor cover on the top was knocked off in transport but it could be screwed back on without any apparent damage. It does not come with the electrical elbow connector so you may need to buy a new one if like mine was over 15 years old and damaged (only cost about $3 from Home Depot).
Original Pentair pool pump went out and the unit quickly arrived in less than 3 days. It was very easy to install and works great. I would recommend this product and will use this channel to replace my other pool components when needed.